YSU-406 Table Top ETO Gas Sterilizer

Process Control and Other Features:

1.       STATE OF THE ART – VACUUM SYSTEM:

Heavy Duty Branded- Oil free diaphragm type vacuum pump is provided to remove the air/gas from the chamber.

2.        AUTOMATIC HUMIDIFICATION SYSTEM:

The machine is equipped with inbuilt automatic humidification system and is able to maintain humidity in the chamber within the range of 80 to 85% automatically controlled by wet and dry humidity transducer system.

3.       AUTOMATIC LOW WATER CUT OFF SYSTEM:

The machine is equipped with automatic low water cut-off system. When the water level decreases below a threshold then heating elements will automatically turn off. The user will be notified in case the water level is not optimum for regular machine operation.

4.        AUTOMATIC PRESSURE CONTROL SYSTEM:

Pressure of the sterilant is controlled automatically through pressure sensor.

5.        AIRTIGHT SEALING:

Heavy Duty branded silicon gasket will be provided for airtight seal.

6.        ANALOGUE GAUGE:

The Sterilizer is fitted with branded NABH calibrated analogue chamber compound gauge to measure the pressure and vacuum of chamber.

7.        DIGITAL CHAMBER TEMPERATURE CONTROLLER:

The Sterilizer is fitted with digital chamber temperature controller and indicator to indicate & control the chamber temperature.

8.        DIGITAL HUMIDIFICATION TEMPERATURE CONTROLLER:

The Sterilizer is fitted with digital humidification temperature controller and indicator to indicate & control the chamber temperature.

9.        CATALYTIC EXHAUST CONVERTER:

Catalytic convertor is provided to treat the ETO gas before exhaust.

10.     DOOR FEATURE:

The sterilizer has single door with wing nut locking system.

Door opening safety:

Door will be open only at the end of cycle and only when chamber is at room pressure and desired chamber temperature is reached.

11.     FLUSH MOUNTING:

The sterilizer is equipped with SS 304 flush mounting of front side.

12.     EUROPIAN STYLE PANELLING:

The sterilizer has fully covered design with panelling back, top and both the sides RHS & LHS.

13.     SAFETY FEATURES:

13.1   HYDRAULIC  TESTING:

Complete sterilizer including chamber and piping are hydraulically tested at 2 times the working pressure.

13.2   SAFETY VALVE:

The sterilizer is fitted with spring loaded safety valve.

13.3    INSULATION:

The sterilizer is completely insulated to prevent any burns caused due to accidental contact to sterilizer body.